GY-1
Source PDF p. 10Water-cut oil with small solid content; CO₂ exposure needs assessment.
- Working temperature*
- 80°C
- Maximum temperature*
- 90°C
PCP SYSTEMS / ENGINEER YOUR CONFIGURATION
Elastomer selection.
The right geometry is only part of the decision. Review temperature, fluid chemistry and solids before selecting a stator compound.
A material for the conditions.
Your engineering shortlist
Next: driveheads →Pump not selected / Elastomer open / Drive open
GY-2
Source PDF p. 10Light oil with aromatic compounds; wear resistance is an evaluation factor.
- Working temperature*
- 100°C
- Maximum temperature*
- 120°C
GY-3
Source PDF p. 10High solids, sand and water-cut service; particle conditions must be supplied.
- Working temperature*
- 80°C
- Maximum temperature*
- 90°C
GY-4
Source PDF p. 10Aromatic compounds, CO₂, water and small amounts of H₂S; concentration limits need review.
- Working temperature*
- 120°C
- Maximum temperature*
- 130°C
GY-5
Source PDF p. 10Aromatic compounds and acid-gas exposure; swelling and mechanical properties need review.
- Working temperature*
- 150°C
- Maximum temperature*
- 170°C
GY-P
Source PDF p. 10Coal-seam water; evaluate actual water chemistry and wear conditions.
- Working temperature*
- 80°C
- Maximum temperature*
- 90°C
GY-A
Source PDF p. 10High-temperature and chemical exposure; mechanical-property trade-offs need review.
- Working temperature*
- 120°C
- Maximum temperature*
- 130°C
GY-F
Source PDF p. 10High-temperature chemical service; these are material figures, not system ratings.
- Working temperature*
- 180°C
- Maximum temperature*
- 200°C
You can continue with unknown parameters.Continue →
BEFORE CONFIRMING A CONFIGURATION
A material rating is not a system rating.
Working and maximum temperatures are brochure material figures. Concentration, pressure, exposure time and mechanical loads still need review. Relative star ratings have not been converted into concentration limits.
KEEP THE DATA WITH YOU
Reference data. Ready to review.
Structured transcription from the supplied brochure. CSV files include source pages where available; they are not a signed datasheet.
YOUR WELL. YOUR CONDITIONS.
Let’s define the next step.
Start with the data you have. Bring the rest into the engineering conversation.